Whole House Sediment Filter

- Aug 13, 2020-

1x Pleated Sediment Filter 5 micron Dirt/Rust Remover 

Pleated Polypropylene Sediment Filter 5 micron.

Size 2.5" x 9 7/8" - Fits most standard 10" size housings and most reverse osmosis systems.

Used to Remove small particles & suspended matter such as silt, rust, sand, algae, sediment, scale particles from water.

Meets FDA requirements for food and beverage contact.

Washable filter to help minimize filtration costs.

Operation Temperature: 40°F to 140°F

Low surface area for a lower pressure drop across filter stage.

1x Sediment Filter 5 micron Dirt/Rust Remover 

Size 2.5" x 9 7/8" - Fits most standard 10" size housings and most reverse osmosis systems.

Used to remove larger particles & suspended matter such as dirt, silt, rust, sand, algae, sediment, scale particles, and cloudiness from water.

Meets FDA requirements for food and beverage contact.

No leachable or extractable materials to contaminate outflowing water.

Long life and increased dirt holding capacity.

No surface binders to reduce flow and increase change-out frequency.

1x CTO 10" Coconut shell Carbon Block Filter

Size 2.5" x 9 7/8" - Fits most standard 10" size housings and most reverse osmosis systems.

Remove Chlorine, Turbidity, Bad Taste & Odor, Sediment, Dirt, and THMS from water.

Thick Wall Coconut Base Carbon Filter Media - 100% coconut shell carbon Designed For maximum contact between the water and carbon.

5 micron nominal filter membrane included to prevent carbon fines to pass from the filter to your drinking water.

Operation Temperature: 40°F to 125°F

Low pressure drop across filter stage.

PP cartridge推广图