Years ago, high purity water was used only in limited applications. Today, deionized (or “DI”) high purity water has become an essential ingredient in hundreds of applications. Just a few include the following:
Large aquariums,fish tanks,and reefkeeping facilities
Electronics manufacturing plants
Food processing plants
Plating and anodizing
And even the final rinse at the local car wash!
Deionized water quality is measured by conductivity or resistivity. In the chart below, resistivity is represented above the line in ohms or megohms ands conductivity is below the line measured in microsiemens.
Type III Purified Water is considered to be 1 meg ohm to 0.02 ohms or 1 to 50 microsiemens.
Type II Pure Water is considered to be 1 to 10 meg ohms or 1.0 to 0.1 microsiemens.
Type I Ultra-Pure Water is considered to be 10 to 18.2 meg ohms or .01 to 0.0555 microsiemens.
Lanlang ® TY MB-2 Resin
Electronic Grade Mixed Bed Resin
For water deionization application
Lanlang ® TY MB-2 is a high quality ionically equilibrated mixed bed resin composed of strong acid cation resin in H+ form and strong base type 1 anion resin in OH+ form. Ready to use as supplied. It is designed for production of high purity water and other applications requiring DI water, such as semiconductor and micro electronic industry, DI water for laboratory, refining after RO system, etc. It can achieve almost complete reduction of TDS and resistivity >15 mega Ohm. Carbon dioxide could carbonate the hydroxide sites of anion component, so it is important to avoid exposure to atmosphere for long period.