Lanlang TC010B Dark Color Water Softener Resin Sodium Form

NSF/ANSI 44, 61 and 372 Certified. Lanlang TC010B is a high capacity, high quality, gel-type cation resin capable of meeting the most exacting requirements of household, farm, commercial, institutional and industrial water softeners. It is supplied in the sodium form as black colored beads in 1 cubic foot bags and larger bulk packages.
Chat Now

Product Details

NSF/ANSI 44, 61 and 372 Certified. Lanlang TC010B is a high capacity, high quality, gel-type cation resin capable of meeting the most exacting requirements of household, farm, commercial, institutional and industrial water softeners. It is supplied in the sodium form as black colored beads in 1 cubic foot bags and larger bulk packages.

dark color water softener resin

Physical Chemical Properties


Resin Composition:

Sulfonated styrene / divinylbenzene copolymer

Ionic Form as Shipped:

Sodium (Na+)

Physical Form:

Black colored beads

Moisture Content:

41 to 41%

Total Capacity:

2.2 meq/ml minimum
45 kilograins as CaCO3 per cubic foot

Odor and Taste:

None

Specific Gravity:

1.28

Net Weight (as shipped):

51 lbs per cubic foot

Particle Size:

16 to 50 mesh - Less than 0.5% through 50 mesh


6

Recommended Operating Conditions


Influent pH:

No restrictions

Maximum Temperature:

250 °F

Bed Depth:

Minimum 24”
Normal 36”

Service Flow Rate:

1 to 5 US GPM per cubic foot

Backwash Flow Rate:

See Fig. 2

Regenerant:

Sodium Chloride (NaCl) or Potassium Chloride (KCl)

Regenerant Strength:

5 to 15%, usually 10%

Regenerant Flow Rate:

0.3 to 1.0 US GPM per cubic foot of resin

Regenerant Contact Time:

15 to 60 minutes

Regenerant Dosage Level:

2 to 15 lb per cubic foot

Slow Rinse (Displacement) Flow Rate:

0.3 to 1.0 US GPM per cubic foot of resin

Slow Rinse Volume:

20 USG per cubic foot resin

Fast Rinse Rate:

1.0 to 5.0 US GPM per cubic foot resin

Fast Rinse Volume:

30 USG per cubic foot resin



Lanlang TC010B Features

No Chlorinated Solvents

The absence of chlorinated solvents in the manufacturing of TC010B results in very low TOC leakage.

Very low color, taste or odor

TC010B meets the requirements for paragraph 173.25 of the Food Additive Regulation of the U.S. Food and Drug Administration.

High Capacity

30,000 grains of softening capacity when regenerated with 15 lbs of NaCl per cu. ft. and 20,000 grains with 6 lbs of NaCl per cu.ft. ensuring high efficiency and low operating costs.

Long Life

Strong and durable beads ensure long service life.

Reliability

Over 34 years of actual field usage by thousands of customers demonstrate the reliability of TC010B.

Safety Information

A material safety data sheet is available for TC010B. Copies can be obtained from Lanlang Corp. TC010B is not a hazardous product and is not WHMIS controlled.

Caution: Acidic and basic regenerant solutions are corrosive and should be handled in a manner that will prevent eye and skin contact. Before using strong oxidizing agents in contact with ion exchange resin, consult sources knowledgeable in the handling of these materials.



TC010B Operating Suggestions


Iron

Lanlang TC010B will remove most of the dissolved iron, can filter much of the suspended iron and may or may not remove organically bound iron from water. When softeners are used to remove iron from the water, periodic cleaning of the bed mechanically or with a chemical iron cleaner may be necessary.

Chlorine

All cation exchange resins are affected by chlorine and suffer degradation and swelling. It is recommended that the chlorine in the water be maintained below 1.0 ppm when using Lanlang TC010B.

Backwash Characteristics

Lanlang TC010B should be backwashed for at least 10 minutes after each service cycle in a conventionally down flow regenerated softener. To reclassify the beads and remove suspended solids from the top of the bed, the resin bed should be expanded at least 50% according to Fig. 2.


In the case of non-conventional or upflow regenerated softeners, it may not be necessary to follow the above procedure since the backwash and brine injection is incorporated in the same step.


Packing Style

包装1


Welcome to contact us! Whether you select a current product or seek engineering assistance, Lanlang is here offering satisfied services to you!

9

Hot Tags: Lanlang TC010B Dark Color Water Softener Resin Sodium Form, China, suppliers, manufacturers, factory, customized, wholesale, discount, price, pricelist, quotation, free sample, made in China

Inquiry

You Might Also Like