DI10251E
DI water deionizer resin cartridge
DEIONIZATION POLISHING CARTRIDGE
Technical Information
DI water deionizer resin cartridge
The DI10251E is a non-regenerable industrial and general-purpose deionization polishing cartridge designed to give multi meg-ohm quality water for analytical and general laboratory use.The highly purified ion exchange resins will deliver high purity water with a minimum TOC background.
The DI10251E is constructed totally from FDA grade materials and media and is designed as a polisher for low TDS feed water. It can be used in a recirculating mode or as a polisher for R/O product water.The capacity on 10 ppm water is approximately 750 gallons. Divide 7500 by the ppm of the feed to get approximate throughput in gallons.Downflow operation is preferred. Intermittent up-flow may cause bed separation and quality failure.Continuous up-flow to exhaustion is acceptable.
Size:9 3/4 in.: Fits all standard 10 in.housings. (Also available in 2.5" X 20" and Big Blue 10" and 20")
Post filter: 20 micron spun-bonded polypropylene.(other micron ratings available upon request)
Filtration Media water deionizer resin :Semiconductor nuclear grade (low TOC) mixed bed ion exchange resin (1:1.5 equivalent ratio)
PRE-FILTER:100 micron reticulated poly foam.
FLOW RATE:0.25-0.5 gpm
CAPACITY:*2000 Liters
pH RANGE:0 - 14
